DISC Aviom D800-Dante A-Net Distributor

Full Description

Make a connection

The missing link in personal mixing. The Aviom D800-Dante A-Net Distributor is ideal for connecting networked audio to your personal mixers (such as the Aviom A320 and A360). Send up to 64 channels to your mixer over a single Cat-5 cable in an instant. With Aviom's A360 Channel Manager you can create mixes catered exactly to your needs. And with no need to worry about IP addressing or routing, set up is simple.

When used with Aviom A360 Personal Mixers, the D800-Dante provides streamlined Network Mix Back for in-ear monitoring. As well as compatibility with the A360 Display™ iOS app, giving you touchscreen control. Rounded off with precision mechanical design and thermal management, the D800-Dante gives you unparalleled performance.

Expand your network

Truly modular design. Aviom have created their A-Net enabled range of products with complete compatibility in mind. Use the D800-Dante in conjunction with Aviom's SB4 System Bridge to combine up to four 16-channel A-Net streams. Or you can easily link multiple Aviom D800s together. Ideal for systems using over 8 personal mixers. By daisy-chaining from output to input you can deliver audio and power to your mixer.

Dante without the Inferno

No hassle Dante compatibility. Right out of the box. An additional ultra low-latency digital audio network at your disposal. You can easily integrate with Dante network components and allow up to 64 channels to be distributed across a huge selection of hardware.

With free Dante Controller software for Mac or PC, you can control your routing easily. Every device is automatically configured and discovered, leaving you with more time to focus on getting the best sound possible.

Features

• Distributes power and audio to up to eight A360, A320, A-16II, and A-16R Personal Mixers
• One Pro16e A-Net In supports A-Net Bridge input from up to four synchronous Pro16 A-Net streams
• Network Mix Back for streamlined connections to wireless IEM transmitters
• Ethernet support for iOS devices over Wi-Fi
• One Pro16e A-Net Out for thru connections
• Heavy-duty locking connectors for all audio connections
• Direct connectivity to a Dante™ audio network
• Support for up to 64 Dante network channels

Specifications

• A-Net Input:
  • Pro16e A-Net
  • EtherCon RJ45 connector
  • Supports A-Net Bridge input
• A-Net Out:
  • Pro16e A-Net
  • EtherCon RJ45 connector, unpowered
• A-Net Mixes Out:
  • Pro16e A-Net
  • EtherCon RJ45 connector, unpowered
  • Provides up to 16 channels of mix data from up to 8 A360 Personal Mixers
• Ethernet: One RJ45 connector for iOS A360 Display support
• LEDs: Power On (red); Sync (green)
• USB: Used for firmware updates
• USB: Used for firmware updates
• A-Net Cables:
  • Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits
  • Unshielded Cat-5e cable may be used on all rear panel connections
• Output Voltage for Personal Mixers: 24 VDC, 0.5 amp transmitted over Cat-5e cable
• Power Supply: Internal, universal switching type, IEC connector
• Input Voltage:
  • 100-240VAC, 50-60Hz, 300W
  • Fuse - 250VAC T4AL
• Dante Primary I/O: Locking RJ45 connector
• Dante Secondary I/O: Locking RJ45 connector
• Stereo Link: Four DIP Switch blocks: 1-16, 17-32, 33-48, and 49-64; used to set up to 32 channel pairs as stereo links
• Stereo Link Defeat: Bypasses DIP switch stereo link settings
• Disable DIP Switch: Chooses Dante (down) or A-Net In (up) as the source input for the D800-Dante
• ID1, ID2 DIP Switch: Reserved
• A, B, C, D DIP Switch: Reserved
• LEDs (rear panel):
  • Error (red)
  • Sync (green)
  • 1 GB Active (red)
  • Network Activity (green)
• Supported Dante Sample Rates:
  • 44.1, 48 kHz – 64 channels
  • 88.2, 96 k Hz – 32 channels
  • 176.4, 192 kHz – 16 channels
• Static IP Support: Yes
• AES67 Support: Yes
• Dimensions: 482.6 x 362 x 88.9 mm
• Weight: 5.44 kg